Login Failed

Invalid login/password combination. You may wish to or

Error

We could not find any active order with id or e-mail mentioned. Try again

Customer Login

Order Id / E-mail
Password
Login

Password Reminder

Enter your E-mail or Order Id. After clicking submit button check you e-mail box for further instructions.
Order Id / E-mail
Submit

Go All-Digital

Supporting the global environment we supply all software as digital downloads only. How can you participate?

We all can be part of the solution. Digital downloads are the "green" answer to demanding fewer resources for your computer's needs. What you get is software with an environmental footprint of zero while still staying up-to-date.

Digital downloads are one part of the larger trend in making our lives - both professional and personal - cleaner, more efficient, and better. Continue reading to see what else you can do to improve your green computing.

Limit screen-saver use. A screen saver does not save energy. In fact, more often than not, a screen saver not only will draw power for the monitor, but also will keep the CPU from shutting down. Instead, set your computer to turn off the monitor first, then go into standby mode after a longer period of inactivity.

Disconnect your Virtual Private Network (VPN) when not actively using your corporate network. Being connected may limit your system's ability to enter standby mode.

Many popular computer games and other third party software packages that run in the background will not allow the computer to go to sleep - even if they are paused or the active window is minimized.

Some web sites or pages that have active banners and or animated advertisements will not allow the computer to sleep on its own and must be closed, or the computer put manually into a sleep state.

Enabled power management to place your monitor, hard drives and computer into a low-power "sleep" mode after a period of inactivity.

Monitor/display sleep: Turn off after 15 minutes or less

Turn off hard drives/hard disk sleep: 15 minutes or less

System standby/sleep: After 30 minutes or less

Advanced users may wish to establish multiple power schemes to address different usage models. For example, you can create a power scheme for playing music CDs that shuts off your hard drive and monitor immediately, but never puts your system into standby mode.

To further reduce power consumption, turn off computing and peripheral devices that are not being used or being used for an extended period of time such as overnight.

Plug all your electronics into one surge protector, so you can easily switch them all off when you leave the room or go to sleep. Most power supplies (such as your cell phone charger) continue to draw power and generate heat even when not attached to a device.
EN
best software shop
Cart (0)
Shop Products Categories
Store Home/Design & CAD/Product Details

Transoft AutoTURN 9

System Requirements: Windows

Billing Cycle

YOU PAY$

Subscription

$ / month
RRP: $
Add to Cart

Terms of Use:

One license per user

Supported Systems:

Windows

Included Languages:

English
Available: 50+
The swept path analysis software trusted most by government agencies, top engineering consultants, and transportation design professionals worldwide
AutoTURN® is the vehicle swept path analysis software of choice for transportation engineers, architects, and planners worldwide. Trusted in over 120 countries and available in 7 languages, AutoTURN is used to confidently analyze road and site design projects including intersections, roundabouts, bus terminals, loading bays, parking lots or any on/off-street assignments involving vehicle access checks, clearances, and swept path maneuvers.

AutoTURN has been developed by transportation professionals for transportation professionals and is backed by rigorous engineering diligence and regular field tests. Why is AutoTURN referenced by leading transportation agencies such as AASHTO, FHWA, and leading Departments of Transportation? Because only AutoTURN gives designers the confidence and peace of mind they need to meet stakeholders’ demands for safety, accessibility, and social, economic and environmental impact.

Vehicle Turn Simulations and Editing

Manually adjust the path offsets by dragging and moving grip points with graphical display of the radius
Modify end nodes for different positioning and sweep angle for Corner and Oversteer Path
Load points for vehicles can be set and either tracked separately or by the shape of the load's swept envelope
Place "adaptive" vehicle simulations on either centered or offset left/right with a smooth transitions option on user-drawn paths made from lines, arcs, polylines, complex chains and even AutoCAD® Civil 3D® alignments
Use the Regenerate Simulation feature on existing simulations to account for conflicts that occur after path obstacles have been added, removed, or modified
Perform three-part vehicle reverse simulation maneuvers to any vector
Ability to continue generating new independent vehicle paths from one main path
Perform reverse cornering with reverse sweep angle ranges of 1° to 160°
Ability to add in realistic vehicle plan views for simulation creation and animations
Generate swept path envelopes from vehicle shapes with chamfered corners or filleted radii
Create conical lines of sight to evaluate mirror views, blind spots or headlight paths
Place, remove, or recall vehicles, active simulations, and active pathways
Add and analyze vehicle loads and clearances

Vehicle Analysis Tools

Evaluate a vehicle simulation on a vertical profile accounting for tracking points, clearances and overhead ceiling line or obstacles
Preview a vehicle's next left/right turn based on minimum turning radius and current speed
Perform Horizontal Sightline analysis based on a polyline, interval and the user specified sight line distance
Check Vertical Sightlines using driver eye height, object height, interval and sight line distances
Conflict analysis feature provides real-time feedback on vehicle path obstructions
Display vehicle conflict points in another layer which can be toggled on and off

SmartPath Technology

SmartPath tools uses four interactive drive modes for performing vehicle forward, reverse, and oversteering turn simulations through mouse movements
SmartPath tools integrate the use of engineering algorithms to account for vehicle speed, superelevation, lateral friction, and turn radii
Generate Arc Path – create turn simulations (i.e. through roundabouts) by dragging the mouse and clicking from point to point
Generate Corner Path – produce simulations using an entrance, arc, and exit tangent and use the mouse to lengthen or shorten the tangent
Generate Oversteer Corner – selecting the desired sweep angle with a mouse click will instantly display whether a turn simulation is viable
Steer A Path – create simulations using the mouse by dragging the vehicle in any direction within the drawing

Specialized Transportation Systems

20 additional special transport vehicle types added including wind blade and tower trailers, beam transporters and heavy haulers
Ability to specify steering linkages allowing for greater customization of special transport vehicles to manufacturer standards
Create and simulate vehicles with independent rear steering systems (including crab steering for supported vehicle types)
Create and simulate vehicles with telescoping trailers to represent logging trucks
Specialized vehicle types include: Wind Tower Trailer; Wind Blade Trailer; Beam Transporter I and II; Booster Trailer; 19-axel Heavy Hauler
Draw cargo for a simulation and combine the cargo envelope with the vehicle body envelope
Define cargo size and set limiting factors for vehicle configuration to operate within industry parameters to prevent damage to the payload or surrounding environment

Customized Vehicle Creation

Ability to place one wheel on an axle for specialized vehicle creation (e.g. steam rollers)
Specify the tire sizing (width and diameter) and space between tires on the same axle
Create, modify, and add user-defined vehicles or vehicle types
Ability to specify the articulation angle per part for multi-part vehicles
Choose track width for axle groups independently within a given part (front and back)

Presentation Selections

Control simulation playback (play, pause, scrub) through the Run Animation Dialog Box
Manage vehicle animations for use with Transoft Solutions’ presentation software, InVision, to create multiple sequencing of vehicle movements that can be saved to AVI videos for client presentations and proposals
Generate hatched areas defined by the vehicle body envelopes or clearance envelopes
Vehicle simulation animations can be looped repeatedly for dynamic presentations
Insert vehicle profiles including dimensions within the drawing file
Full motion, drag & drop, and stop frame animation options

Reporting Features

Speed Profile Report – Generate report of vehicle speed based on the scanned geometry with elements including Vmax and Vmin, Acceleration/Deceleration and lateral friction per report
View override/path angle information for independently rear steering vehicles
View graph report of a multi-part vehicle’s articulation angles when generating or placing a simulation
View vehicle steering angle graphs and simulation summary data such as speed, path length, and vehicle type
Reports are customizable - affect display color, line types, and formatting
Summary reports include orientation and simulation type (arc, corner)

What customers say

Floris, NZ
Everything had gone as expected - Very smooth
Hans, NL
My first experience with Soft Store, downloading and installing the software went allright. Thank you!
pablo, US
Hi. I downloaded, and installed the software. No issues at all, the software works very good. Thank you.
Annette, AU
I'm really pleased with how informative the instructions were and your web pages are designed simply and are easy to follow. Thankyou
Kerry Kracht, US
Once again, please let me thank you for your prompt and attentive service. I look forward to working with your company in the future. Sincerely, Kerry Kracht
Misty, US
Extremely pleased with Soft Store. It's products, price and quality
Tinia, US
still checking out the entire system. I am new at learning computer stuff and slow at it. Lots to read - thank you so far so good :)